Level Tec Process Control

VT420 sensors  are 2-wire loop-powered 4-20mA RMS vibration velocity sensors (per ISO 10816). Vibration sensors capture machinery/equipment performance data by creating a 4-20 mA signal proportional to the level of vibration the the machine is making.  This data can be used by PLC's or Controllers to shut down machinery before it fails and leads to damage or productivity waste.  
VT420 comes with a NEMA 4X enclosure, a 1/4-28 UNF 2A threaded mount, an M12 connector, and is two-wire loop powered. 

The optional PM500 Process Meter can be used as a remote display and can provide the +24 VDC output power for the VT420. Also, the PM500 has the option of two or four relays which are fully programmable and there is a 2-channel, 16-bit 4-20 mA programmable output option for mirroring the 4-20 mA signal to a PLC.

• Monitors equipment for unwanted vibration 
• RMS vibration velocity sensor (per ISO 10816)
• 2-wire 4-20 mA output
• 24Vdc recommended loop power
• NEMA 4X enclosure
• Optional PM500 Process Meter display
• M12 connector or Fixed Cable

The VUM800 Vibration Monitor confirms normal operation of processes utilizing continuous vibration. Since the VUM800 measures actual vibration, not motor rotation, power draw, or any other implied measures, all sources of failure are detected: power loss, motor or gearbox failure, belt slippage, or breakage. Applications include shaker screens, vibratory feeders, bin bottoms, and crushers. The solid state electronics of the rugged VUM800 are epoxy encapsulated in metal. The VUM800 is easily installed and needs no calibration or maintenance. The unit is failsafe; power loss or a broken cable will indicate an alarm situation.

• Heavy-duty sensing probe
• DPDT 10 amp relay
• Optional 230 VAC operation
• Control unit remotely mounted
• Mercury Switch monitors for machinery failure
• Failsafe operation